Modified Screeds

Fast Drying

Fast-drying screed such as Isocretes,  use super-plasticisers to reduce the amount of water needed to make the screed mixture plyable, this in turn makes for a fast drying time as there is a higher cement to water ratio.


Fast Set

Fast-set screed such as a hydro rapid type screed rely on aluminium based cement to accelerate the setting process. This type of screed can have foot traffic after an hour or two, and is usually dry within 2 days.  This type of system is expensive if used on large areas and it can only be site mixed.


Polymer Modified

Polymer modified screed is a standard cement mix with SBR added in large amounts to create a gluey screed.  When set theses types of screed are resistant to water and other chemicals, they also allow floor screeds to be thinner than non-polymer modified screeds.


Specialists Screeds

As well as traditional sand and cement screeds we can also offer fibrous screed, early strength screed, early fibrous strength screed and SBR rubber toughened screed, all in a range of grades from C5 to C30.(factory quality control)